T03B-1200W

Ａ．Product introduction：

１.Design Theme&Concept

Theme: People oriented, life optimization, image building, individuality showing.

Concept: Principles of safety and reliability, advanced technology, economic rationality, energy saving, environmental protection and convenient maintenance.

 

２.Standards and regulations that the design complies with

1）The structure and safety performance of the luminaires should be based on:

“General safety requirements and tests for luminaires”   　　           GB7000.1-2007

“Safety requirements of luminaires for road and street lighting”      GB7000.5-2005

“Lamp controlgear, part 1”                                         　　　　　　　GB19510.1-2004

2）The optical performance of the luminaires should be based on:

“Standard for lighting design of urban road”              　　　　          CJJ45-2006

“Photometry of luminaires for street lighting”              　　　　         GB9468-1998

 

３.Product characteristics

◆Aluminum AL6063 stretch forming is adopted, anodic oxidation, higher level of corrosion-proof; ◆Integrated aluminum die-casting ADC12 is adopted at both sides, electrostatic spraying, solid and corrosion-proof; ◆Air convection active heat dissipation method is adopted to ensure the working temperature of the light source; the power supply is placed below with lower temperature; ◆Large built-in space, intelligent PLC, Zigbee, sensor and other modules can be equipped; ◆Various optical angles, including TYPE III，TYPE IV，TYPE V,NEMA4，NEMA6 etc; ◆Various installation methods are available, including rotating bracket, wall mounting, pole mounting, etc.

４.Applicable occasions

1） Suitable for city square lighting and high pole area lighting;

2） Large-scale building projection lighting, long-distance lighting;

3） High-pole lighting for airports, highways and parks;

4）  Basketball courts, football fields, tennis fields, baseball fields and other places.

 

５.Structural features

1) Power supply- dual waterproof

 

Built in waterproof power supply + shell protection, being placed under the lamp body, low temperature, IP66 design, protection functions including short circuit / overload / overvoltage / overheating .

２）Special optical design mask

 

Teijin Optics PC, high-precision injection molding, high light transmittance, with anti-yellowing, anti-ultraviolet and other functions.

 

二．Specifications and parameters

1. Product Selection Form

Type	Model	LED quantity(PCS)	Rated power（W）	Luminous flux/(LM)
Black	ZHS-TG03-200W	288pcs	200	26000LM
	ZHS-TG03-300W	480pcs	300	39000LM
	ZHS-TG03-400W	576pcs	400	42000LM
	ZHS-TG03-600W	960pcs	600	78000LM
	ZHS-TG03-800W	1152pcs	800	104000LM
	ZHS-TG03-1200W	1920pcs	1200	156000LM

 

2. Electrical parameters

Parameters	Minimum	Rating	Maximum
Operating voltage	100V AC	220V AC	240V AC
Operating frequency	43Hz	50Hz	63Hz
Total power	±5%
Light source power	－10%
Power factor	0.92	0.95	0.99
Power efficiency	86%	89%	92%
Constant current accuracy	2%	3%	5%

 

３.Optical parameters

Projects	Parameter value
Efficacy	≥130 Lm/W
Luminous flux	200W≥26000Lm,300W≥39000Lm,400W≥42000Lm,600W≥78000Lm,800W≥104000Lm,1200W≥156000Lm
Luminaire efficiency	≥90%
Color rendering index	≥80
Light-emitting angle	TYPE II，TYPE III，TYPE IV，TYPE V,NEMA4，NEMA6
Color difference	≦5 SDCM
Color temperature	暖白：3000K   正白：4000K  冷白：5000K

 

４.Operation parameters

Projects	Parameter value
Surface temperature	＜65℃
Operating temperature	‐25℃—45℃
Storage temperature	‐40℃—85℃
Humidity adaptation	≤90%
Material composition	Al, special optical design mask, high and low temperature resistant and waterproof silicone sealing ring
Mean time between failures	30000 hrs
Protection grade	IP66
Installation	Rotating bracket mounting, ₵60pole mounting, wall mounting
Recommended pole height	15m-18m

 

5.  Light distribution curve

 

　　　　TYPE类                　　　　       NEMA4-25度           　　　   NEMA6-45度   

６.Isophot diagram

　　　　　　　　　　　　　NEMA4-25度参考

７.Dimensions

1200w-with anti-dazzle cover 

           

 

 

 

 

三、Product description

1. Instructions

● 3-core sheathed wire input, in which the brown wire is connected to the live wire, the blue wire is connected to the neutral wire, and the yellow-green flower wire is connected to the earth wire.

● Fix the LED flood light on the installation platform, tighten the hexagonal screws, and keep the balance of the LED high pole light during installation.

● LED flood light can work normally with rated voltage. In the process of working, the voltage must be within the rated range. Beyond the rated voltage, it will cause irreparable damage.

２.Precautions

● Please cut off the power supply before installation and ensure that the installation part can bear the weight of the light.

● In order to prevent falling off, please make sure the installation is correct.

● Please do not cover the light with any stuff.

● For safety, please make sure the earth wire is connected.

● Breakdowns caused by decomposition, modification, or improper construction of the product are not covered by this warranty.